Satronic Control Box MMI810.1 MOD33 (0620220U)
Technical Data
Operating Voltage | 220 / 240 V (-15... +10%) 50 Hz (50 - 60 Hz) |
---|---|
Differing Frequency | result in proportional timing deviations |
Fuse Rating | max. 10 A rapid, 6 A slow |
Power Consumption | 10 VA |
Max. Load per Output | |
term. 3 | 2A, cos ϕ 0.2 |
term. 4, B | 2A, cos ϕ 0.4 |
term. 5, 6, | 1A, cos ϕ 0.4 |
Total load | 5A, cos ϕ 0.4 |
Amplifier sensitivity | 1 µA |
Minimum Required Ionization Current | 5 µA |
Flame detector cable | max. 20 m cable length |
Air pressure monitor | working contact 4 A, 230 V |
Waiting time for malfunction remedy | None |
Flame Detector | |
Ionisation probe | - |
Infra-red flicker detector | IRD 1020 |
Weight incl. base | 350g |
Mounting position | any |
Insulation standard | IP44 |
Admissible ambient temperature for controller and flame detector | -20° C... +60° C |
Classified acc. to EN 298 | BTLLXN |
Satronic Control Box MMI810.1 MOD 33
Gas Burner Automatic Safety Control
For 2 stage forced draught and combi oil/gas burners.
- Suitable Flame Detectors :
- Ionisation probe
- Infra-red flicker detector
The gas burner automatic safety control MMI controls and monitors blown gas- and combined burners of any nominal thermal load (tested and certified according to EN 298).
The automatic safety controls MMI 810.1 models 13, 33 and 35 can also be utilized for burners on fixed hot air heaters (Direct air heaters according to DIN 4794).
Various types and model designations differentiate the automatic safety controls with respect to the programme times, as well as with regard to differing national standards.
MMI 810.1 Mod 33 : Art. Nr. 0620220
MMI 810.1 Mod 33 | Program Timing Seconds. | |
---|---|---|
Waiting time at start ca. | tw | 9 |
Max. reaction time for air proving switch | tlw | 6 |
Pre-purge time | tv1 | 24 |
Pre-ignition time | tvz | 3 |
T. ignition time | tz | 6 |
Safety time | ts | 3 |
Time delay term.6/term.C | tv2 | 10 |
Datasheets |
---|